• View PDF
    Standard
  •   0091-22-66157017
  •   info@torqbolt.com
    • Home
    2. ASTM F467 Grade R58640

    ASTM F467/F467M Grade R58640 Alloy 19 Nuts Specification

    Titanium alloy nuts designed for high-performance and corrosion-resistant applications.

    ASTM F467/F467M Grade R58640 Alloy 19 Nuts provide excellent fatigue resistance, durability, and high mechanical strength for demanding aerospace, marine, and engineering environments.

    ASTM F467/F467M Chemical Composition

    ASTM F467/F467M Titanium and Titanium-Base Alloys A

    UNS Designation Number Alloy General Name Al C Fe Ti H N O Pd V Cr Mo Zr Sn Si Ru Residuals B
    each, max total, max
    ASTM F467/F467M Grade R58640 19 Titanium Ti-38-6-44 3.0- 4.0 0.05 0.30 balance 0.0200 0.03 0.12 0.10 A 7.5- 8.5 5.5- 6.5 3.5- 4.5 3.5- 4.5 . . . . . . 0.10 C 0.15 0.4
    • (A) All reported values are maximums, unless a range is specified.
    • (B) A residual is an element present in a metal or an alloy in small quantities inherent to the manufacturing process but not added intentionally. Residual elements need not be reported unless a report is specifically required by the purchaser.
    • (C) Ruthenium and Palladium, or both, may be added to Grade 19 for enhanced corrosion resistance as negotiated between purchaser and vendor. Chemical analysis is not required unless specifically negotiated.

    ASTM F467/F467M Mechanical Requirements

    ASTM F467/F467M Mechanical Requirements (Inch)

    Alloy Mechanical Property Marking Hardness, min A Proof Stress, Hex Nut min, ksi Proof Stress, Heavy Hex Nut min, ksi B
    ASTM F467 Alloy Ti 19 F467M 24 HRC 120 130
    • (A) For aluminum and titanium alloys hardness values are for information only.
    • (B) Proof stress values for heavy hex nuts are based on 1.08 times the value for corresponding regular hex nuts.
    • (C) Aluminum alloy 2024-T4 shall be supplied in naturally aged condition. This material is not recommended for nuts in sizes greater than 1/4 (0.250) in.

    ASTM F467M Mechanical Requirements (Metric)

    Alloy Mechanical Property Marking Hardness, min A Proof Stress, Mpa
    ASTM F467M Ti 19 F467MM 24 HRC 825
    • (A) For aluminum and titanium alloys hardness values are for information only.
    • (B) Aluminum alloy 2024-T4 shall be supplied in naturally aged condition. This material is not recommended for nuts in nominal thread diameter larger than M6.

    ASTM F467/F467M Tensile Stress Areas and Threads per Inch

    Nominal Size, in. Coarse Threads-UNC Fine Threads-UNF 8 Thread Series-8UN
    Threads/in. Stress Area A, in 2 Threads/in. Stress Area A, in 2 Threads/in. Stress Area A, in 2
    1/ 4 20 0.0318 28 0.0364 . . . . . .
    5/ 16 18 0.0524 24 0.0580 . . . . . .
    3/ 8 16 0.0775 24 0.0878 . . . . . .
    7/ 16 14 0.1063 20 0.1187 . . . . . .
    1/ 2 13 0.1419 20 0.1599 . . . . . .
    9/ 16 12 0.1820 18 0.2030 . . . . . .
    5/ 8 11 0.2260 18 0.2560 . . . . . .
    3/ 4 10 0.3340 16 0.3730 . . . . . .
    7/ 8 9 0.4620 14 0.5090 . . . . . .
    1 8 0.6060 12 0.6630 . . . . . .
    1 1/ 8 7 0.7630 12 0.8560 8 0.790
    1 1/ 4 7 0.9690 12 1.0730 8 1.000
    1 3/ 8 6 1.1550 12 1.3150 8 1.233
    1 1/ 2 6 1.4050 12 1.5810 8 1.492
    • (A) Tensile stress areas are computed using the following formula:
    • A s = 0.7854 [ D - 0.9743/n ]
      • where:
      • As = tensile stress area, in. 2 ,
      • D = nominal size (basic major diameter), in., and
      • n = number of threads per inch.

    ASTM F467/F467M Tensile Stress Areas and Threads per Metric

    Nominal Nut Diameter and Thread Pitch Stress Area, Amm 2 Nominal Nut Diameter and Thread Pitch Stress Area, Amm 2
    M6 × 1 20.1 M16 × 2 157
    M8 × 1.25 36.6 M20 × 2.5 245
    M10 × 1.5 58.0 M24 × 3 353
    M12 × 1.75 84.3 M30 × 3.5 561
    M14 × 2 115 M36 × 4 817
    • (A) Tensile stress areas are computed using the following formula:
    • As = 0.7854 (D − 0.9382P) 2
      • where:
      • As = tensile stress area, mm. 2 ,
      • D = nominal size (basic major diameter), mm., and
      • n = number of threads per mm.

    ASTM F467/F467M Heat Treatment

    Alloy Condition
    Copper (all alloys) As formed or stress relieved at manufacturer's option
    Nickel alloys 400 and 405 As formed or stress relieved at manufacturer's option
    Nickel alloy 500 Solution annealed and aged
    Aluminum alloy 2024-T4 Solution treated and naturally aged
    Aluminum alloy 6061-T6 Solution treated and artificially aged
    Aluminum alloy 6262-T9 Solution treated, artificially aged, and cold worked
    Titanium 625 Annealed

    Frequently Asked Questions

    What is Titanium Grade 19 (R58640)?

    Grade 19 is a metastable beta titanium alloy (Ti-3Al-8V-6Cr-4Mo-4Zr) covered under ASTM F467 for ultra-high-strength nonferrous nut. Solution-treated + aged delivers tensile 200 ksi+, yield 180 ksi+. Used for niche aerospace and oilfield applications requiring titanium-class corrosion with steel-class strength.

    Heat treatment for Grade 19 bolts?

    Solution treat at 1450-1600 F (790-870 C), water or air quench, then age at 950-1100 F (510-590 C) for 4-8 hours. Different age conditions trade strength for ductility. TorqBolt supplies Grade 19 in solution + aged condition with full F467 certification.

    Where is Grade 19 typically used?

    Premium oilfield wellhead bolting, niche aerospace structural fasteners, and corrosive high-load applications where Grade 5 + Grade 23 cannot deliver the proof load. Low volume but high value.

    Sour-service acceptance?

    Yes - R58640 is NACE MR0175-listed subject to standard hardness controls.

    References & Standards

    • ASTM F467 / F467M - Standard Specification for Nonferrous Nuts for General Use
    • ASTM F468 / F468M - Companion specification for Nonferrous Bolts, Hex Cap Screws, and Studs (mate with F467 nuts for matched-alloy assemblies)
    • ASTM F436 / F436M - Hardened steel washers (ferrous washer companion when nonferrous washers are not specified)
    • NACE MR0175 / ISO 15156 - Sour-service hardness limits for petroleum and natural gas industries
    • ASME B18.2.2 / B18.2.4.1M / B18.2.4.6M and ISO 4032 / 4033 / 4035 - Dimensional standards referenced by F467
    • DIN 934 / 439 / 6330 - Metric hex nut dimensional standards
    Questions? Contact us.
    Showcase of our Microsites.
    Satisfaction Survey

    survey

    TUVRheinland CERTIFIED

    © TorqBolt P(Ltd) · Built with in INDIA.