Below is the complete specification document for ASTM F467/F467M Nonferrous Nuts.
ASTM F467-13ε2 covers commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter, in alloys in common use for general service (1.1). Values are inch-pound; F467M is the metric companion (1.3, Note 1). Mating bolts, cap screws and studs are covered by ASTM F468 (1.2).
ASTM F467-13ε2 Table 1 lists 35 wrought alloys: 16 copper-base (C11000, C26000, C27000, C46200, C46400, C51000, C61300, C61400, C63000, C64200, C65100, C65500, C66100, C67500, C71000, C71500), 8 nickel-base (N10001, N10276, N04400, N04405, N05500, N06059, N06625, N06686), 3 aluminum-base (A92024, A96061, A96262) and 8 titanium (R50250, R50400, R50700, R56400, R56401, R52400, R58640, R55111). Table 2 gives hardness, proof stress and marking for each; alloys 59 and 686 have four strength grades and alloy 625 has two.
Quantity, name of item, size (diameter and threads per inch), alloy number from Table 1, stress relieving if required, shipment lot testing if required, source inspection if required, certificate of compliance or test report if required, any additional or supplementary requirements, and the ASTM designation with year (3.1).
S1: copper alloy nuts show no cracking after 30 min in mercurous nitrate per ASTM B154. S2: shipment lot testing, with chemical analysis and mechanical tests per this specification and F1470 on each lot, and a test report. S3: dye penetrant inspection per ASTM E165 with acceptance criteria agreed. S4: heat control for alloys 400, 405 and 500, with product identified by actual heat number and S2 invoked automatically.
