• View PDF
    Standard
  •   0091-22-66157017
  •   info@torqbolt.com
    • Home
    2. ASTM F467 Grade N10001

    ASTM F467/F467M Grade N10001 Alloy 335 Nuts Specification

    High-performance nickel alloy nuts engineered for chemical processing industries.

    ASTM F467/F467M Grade N10001 Alloy 335 Nuts provide exceptional resistance against reducing acids, corrosion, and harsh industrial environments for long-term reliability.

    ASTM F467/F467M Chemical Composition

    ASTM F467/F467M Nickel and Nickel-Base Alloys

    UNS Designation Number Alloy General Name Al C, max Cr Cu A Fe, max Mn, max Ni A P, max Si, max Ti Co, max Mo S, max V W Cb †
    ASTM F467/F467M Grade N10001 335 Ni-Mo . . . 0.05 1.0 max . . . 4.0- 6.0 1.0 balance 0.025 1.00 . . . 2.50 26.0- 30.0 0.030 0.2- 0.4 . . . . . .
    • (A) Elements shown as balance shall be arithmetically computed by deducting the sum of the other named elements from 100.
    • (B) Cobalt is to be counted as nickel.

    ASTM F467/F467M Mechanical Requirements

    ASTM F467/F467M Mechanical Requirements (Inch)

    Alloy Mechanical Property Marking Hardness, min A Proof Stress, Hex Nut min, ksi Proof Stress, Heavy Hex Nut min, ksi B
    ASTM F467 Alloy Ni 335 F 467S 20 HRC 115 124
    • (B) Proof stress values for heavy hex nuts are based on 1.08 times the value for corresponding regular hex nuts.

    ASTM F467M Mechanical Requirements (Metric)

    Alloy Mechanical Property Marking Hardness, min A Proof Stress, Mpa
    ASTM F467M Ni 335 F467MS 20 HRC 790

    ASTM F467/F467M Tensile Stress Areas and Threads per Inch

    Nominal Size, in. Coarse Threads-UNC Fine Threads-UNF 8 Thread Series-8UN
    Threads/in. Stress Area A, in 2 Threads/in. Stress Area A, in 2 Threads/in. Stress Area A, in 2
    1/ 4 20 0.0318 28 0.0364 . . . . . .
    5/ 16 18 0.0524 24 0.0580 . . . . . .
    3/ 8 16 0.0775 24 0.0878 . . . . . .
    7/ 16 14 0.1063 20 0.1187 . . . . . .
    1/ 2 13 0.1419 20 0.1599 . . . . . .
    9/ 16 12 0.1820 18 0.2030 . . . . . .
    5/ 8 11 0.2260 18 0.2560 . . . . . .
    3/ 4 10 0.3340 16 0.3730 . . . . . .
    7/ 8 9 0.4620 14 0.5090 . . . . . .
    1 8 0.6060 12 0.6630 . . . . . .
    1 1/ 8 7 0.7630 12 0.8560 8 0.790
    1 1/ 4 7 0.9690 12 1.0730 8 1.000
    1 3/ 8 6 1.1550 12 1.3150 8 1.233
    1 1/ 2 6 1.4050 12 1.5810 8 1.492
    • (A) Tensile stress areas are computed using the following formula:
    • A s = 0.7854 [ D - 0.9743/n ]
      • where:
      • As = tensile stress area, in. 2 ,
      • D = nominal size (basic major diameter), in., and
      • n = number of threads per inch.

    ASTM F467/F467M Tensile Stress Areas and Threads per Metric

    Nominal Nut Diameter and Thread Pitch Stress Area, Amm 2 Nominal Nut Diameter and Thread Pitch Stress Area, Amm 2
    M6 × 1 20.1 M16 × 2 157
    M8 × 1.25 36.6 M20 × 2.5 245
    M10 × 1.5 58.0 M24 × 3 353
    M12 × 1.75 84.3 M30 × 3.5 561
    M14 × 2 115 M36 × 4 817
    • (A) Tensile stress areas are computed using the following formula:
    • As = 0.7854 (D − 0.9382P) 2
      • where:
      • As = tensile stress area, mm. 2 ,
      • D = nominal size (basic major diameter), mm., and
      • n = number of threads per mm.

    ASTM F467 Condition (Heat Treatment)

    Except as provided in 4.2.3, nuts are furnished in the condition below (4.2.2). When required, stress relieving is specified by the purchaser for all copper alloys and nickel alloys 400 and 405 (4.2.3). Unless otherwise specified, nuts may be hot pressed, cold formed or machined at the manufacturer's option (4.2.1).

    Alloy Condition
    Copper (all alloys) As formed or stress relieved at manufacturer's option
    Nickel alloys 400 and 405 As formed or stress relieved at manufacturer's option
    Nickel alloy 500 Solution annealed and aged
    Aluminum alloy 2024-T4 Solution treated and naturally aged
    Aluminum alloy 6061-T6 Solution treated and artificially aged
    Aluminum alloy 6262-T9 Solution treated, artificially aged, and cold worked
    Titanium 625 Annealed

    Frequently Asked Questions

    What is ASTM F467 alloy 335 (UNS N10001)?

    UNS N10001 is alloy 335, listed in Table 1 of ASTM F467-13ε2 as Ni-Mo. Key composition limits: molybdenum 26.0-30.0 %, iron 4.0-6.0 %, nickel balance. Nickel alloy raw material is covered by ASTM B574 (4.1.1).

    What hardness and proof stress do F467 alloy 335 nuts need?

    Table 2 requires a minimum hardness of 20 HRC and a minimum proof stress of 115 ksi for hex nuts and 124 ksi for heavy hex nuts. Heavy hex values are 1.08 times the hex nut value (note B). Where both proof load and hardness are tested, proof load governs acceptance (6.2).

    What is the proof load of a 1/2-13 UNC F467 alloy 335 nut?

    Proof load is the Table 2 proof stress times the Table 4 tensile stress area (13.2.1, tested per ASTM F606). For 1/2-13 UNC the stress area is 0.1419 sq in, so a hex nut must carry 16,318 lbf (115 ksi) and a heavy hex nut 17,596 lbf (124 ksi) without failure.

    How are F467 alloy 335 nuts marked and supplied?

    Each nut carries the manufacturer's symbol and the Table 2 marking F 467S, raised or depressed (17.1). Unless otherwise specified, dimensions are to ASME B18.2.2 (7.1), threads are Class 2B to ASME B1.1 (7.2) and nuts are furnished without any additive chemical or metallic finish (8.2). Mating bolts, cap screws and studs are covered by ASTM F468 (1.2).

    References & Standards

    • ASTM F467-13ε2 - Standard Specification for Nonferrous Nuts for General Use (inch-pound; F467M is the metric companion, Note 1)
    • ASTM F468 - Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use (mating bolts, 1.2)
    • ASME B18.2.2 - Square and Hex Nuts (nut dimensions unless otherwise specified, 7.1)
    • ASME B1.1 - Unified Inch Screw Threads (Class 2B nut threads, 7.2)
    • ASTM F606 - mechanical test methods for proof load (13.2.1); ASTM E18 and E92 - Rockwell and Vickers hardness (13.2.2)
    • ASTM B154 - mercurous nitrate test for copper alloys (Supplementary Requirement S1)
    • ASTM B574 - nickel alloy rod (raw material for nickel alloy nuts, 4.1.1)
    Questions? Contact us.
    Showcase of our Microsites.
    Satisfaction Survey

    survey

    TUVRheinland CERTIFIED

    © TorqBolt P(Ltd) · Built with in INDIA.